Dell 2130 Color Laser Troubleshooting Guide download pdf (Page 4)

Printing on Letterhead

Check with the manufacturer or vendor to determine whether the pre-printed letterhead you have selected is acceptable for laser printers.

Page orientation is important when printing on letterhead. Use the following table for help when loading letterhead in the print media sources.



Selecting Pre-Punched Paper

Pre-punched paper brands can differ in the number and placement of holes and in manufacturing techniques. However, it may not be possible to print on the

paper to depending on the placement of holes on the paper.

To select and use pre-punched paper:

l Test paper from several manufacturers before ordering and using large quantities of pre-punched paper.

l Paper should be punched at the paper manufacturer and not drilled into paper already packaged in a ream. Drilled paper can cause jams when multiple

sheets feed through the printer. This may result in a paper jam.

l Pre-punched paper can include more paper dust than standard paper. Your printer may require more frequent cleaning and feed reliability may not be

as good as standard paper.

l Weight guidelines for pre-punched paper are the same as non-punched paper.

Envelopes

Depending on the choice of envelopes, it is possible to expect variable levels of light wrinkling. Before buying large quantities of any print media, it is

recommended that you try a sample first. See "Loading Print Media in the Standard 250-Sheet Tray and Optional 250-Sheet Feeder" or "Loading the Single

Sheet Feeder" for instructions on loading an envelope.

When printing on envelopes:

l Use only high-quality envelopes that are designed for use in laser printers.

l Set the print media source to the single sheet feeder or standard 250-sheet tray. Set the paper type to Envelope, and select the correct size of

envelope from the printer driver.

l For best performance, use envelopes made from 75 g/m

(20 lb bond) paper. You can use up to 105 g/m

(28 lb bond) weight for the envelope feeder

as long as the cotton content is 25% or less. Envelopes with 100% cotton content must not exceed 90 g/m

(24 lb bond) weight.

l Use only freshly unpackaged, undamaged envelopes.

l Useenvelopesthatcanwithstandtemperaturesof205°C(401°F)withoutsealing,excessivecurling,wrinkling,orreleasinghazardousemissions.If

you have any doubts about the envelopes you are considering, check with the envelope supplier.

l Adjust the guide to fit the width of the envelopes.

l To load envelope in the single sheet feeder, insert the envelope with the flaps closed and the short-edge of the envelope facing into the printer. The

print side must be facing down.

l See "Loading Print Media in the Standard 250-Sheet Tray and Optional 250-Sheet Feeder" or "Loading the Single Sheet Feeder" for instructions on

loading an envelope.

l Use one envelope size during a print job.

l Ensure the humidity is low because high humidity (more than 60%) and the high printing temperatures may seal the envelopes.

l For best performance, do not use envelopes that:

Print media source

Print side

Page orientation

Standard 250-Sheet Tray

Optional 250-Sheet Feeder

Face up

Letterhead enters the printer last

Single Sheet Feeder

Face down

Letterhead enters the printer first

Downloaded from ManualsPrinter.com Manuals

1 2 3 4 5 6 7 8 9 ... 203 204

Dell 2130 Color Laser Troubleshooting Guide Page 4

Comments to this Manuals

Dell 2130 Color Laser Troubleshooting Guide Page 4

Comments to this Manuals

Related products and manuals for Laser/LED printers Dell 2130 Color Laser