Purpose:
To configure detailed settings for NetWare.
Values:
E-Mail Alert
Purpose:
To configure detailed settings for E-Mail Alert. This page can also be displayed by clicking E-Mail Alert in the Left Frame.
Values:
Specifies the printer name up to 47 alphanumeric characters.
For PServer Mode, set the Print Server Name (Print Server Object Name). The original setting remains valid if no input is made.
Displays the current mode for Active Mode.
Specifies the tree name up to 32 alphanumeric characters. Configure this item only when Active Mode is Directory: PServer
Mode.
Specifies the context name of the Print Server Object up to 255 alphanumeric characters. Configure this item only when Active
Mode is Directory: PServer Mode.
Sets the time interval from when print data enters the print queue until printing starts. The setting range is from 1 to 1000
seconds. The original setting remains valid if no input is made. Configure this item only when Active Mode is Bindery: PServer
Mode or Directory: PServer Mode.
Sets the print server password up to 32 alphanumeric characters. Configure this item only when Active Mode is Bindery:
PServer Mode or Directory: PServer Mode.
Enter the password again.
Displays the status of NetWare.
Select the check box to enable Active Discovery.
*
1
The following are illegal characters: semicolon (;), colon (:), asterisk (*), question mark (?), period (.), comma (,), yen mark (¥), back slash (\), double
quotation ("), comparison symbols (< >), brackets ([ ]), operation symbols (+, =, or ~), pipe (|), slash (/), and space ( ).
NOTE: The settings in the NetWare page will be valid only when NetWare or the printer is rebooted. Click the Apply new settings button to apply new
settings.
NOTE: An optional network protocol adapter is required to display the NetWare page.
Sets the primary SMTP gateway.
Specifies the SMTP port number. This must be 25, 587 or between 5000 and 65535.
E-Mail Send
Authentication
Specifies the authentication method for outgoing e-mail.
Specifies the SMTP login user. Up to 63 alphanumeric characters, periods, hyphens, under bars, and at symbols
(@) can be used. If specifying more than one address, separate them using commas.
Specifies the SMTP account password using up to 31 alphanumeric characters.
Re-enter SMTP Login
Password
Enter the SMTP account password again to confirm it.
Specifies the POP3 server address in IP address format of "aaa.bbb.ccc.ddd" or as a DNS host name using up to
63 characters.
Specifies the POP3 server port number. This must be 110 or between 5000 and 65535.
Specifies the POP3 account user name.
Up to 63 alphanumeric characters, periods, hyphens, under bars, and at symbols (@) can be used. If specifying
more than one address, separate them using commas.
Specifies the POP3 account password using up to 31 alphanumeric characters.
Re-enter POP User
Password*
1
Enter the POP3 account password again to confirm it.
Designates the reply e-mail address sent with each E-mail Alert.
Displays the status of the SMTP server connection.
Sets acceptable e-mail addresses for the E-Mail Alert feature using up to 255 alphanumeric characters.
Select the check box to receive an E-Mail Alert for consumables.
Select the check box to receive an E-Mail Alert for paper handling.
Select the check box to receive an E-Mail Alert for Service Calls.
Sets acceptable e-mail addresses for the E-Mail Alert feature using up to 255 alphanumeric characters.
Select the check box to receive an E-Mail Alert for consumables.
Select the check box to receive an E-Mail Alert for paper handling.
Select the check box to receive an E-Mail Alert for Service Calls.
Downloaded from ManualsPrinter.com Manuals
Comments to this Manuals