NetWare Setup Page
Purpose:
To verify the current settings of Netware. In this page, you can only verify the settings of items. If you want to change the settings, go to the pages in the
Print Server Settings tab.
Values:
E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP (Simple Mail Transfer Protocol/Post Office Protocol) used for the e-mail feature and E-Mail Alerts feature. In this
page, you can only verify the settings of items. If you want to change the settings, go to the pages in the Print Server Settings tab.
Values:
Remote peers IPv4 address
Displays the IP address to connect to.
Remote peers IPv6 address
Displays the IP address to connect to.
Non IPsec communication
policy
Displays the status of the Non IPsec communication policy feature.
Displays the status of IEEE 802.1x.
Displays the setting of authentication method for IEEE 802.1x.
Displays the list of IP addresses that are permitted or denied access to the printer.
*
1
This settings are not displayed when the optional wireless printer adapter is installed.
*
2
An optional wireless printer adapter is required to display the item.
*
3
This item is only available when using Ipv6 dual mode.
*
4
An optional network protocol adapter is required to display the item.
*
5
This item is only available for LPD or Port9100.
Displays the port status.
Displays the printer name.
Displays the current mode for Active Mode.
Displays the context name of the Print Server Object.
Displays the time interval.
Displays messages according to the conditions of the printer.
Displays whether active discovery is enabled.
NOTE: An optional network protocol adapter is required to display the NetWare Setup Page.
Displays the port status.
Displays the primary SMTP (Simple Mail Transfer Protocol) gateway.
Displays the SMTP port number.
E-Mail Send
Authentication
Displays the authentication method for outgoing e-mail.
Displays the POP3 (Post Office Protocol 3) server address.
Displays the POP3 port number.
Displays the IP address of servers connected with SMTP protocol when data is incoming.
Displays the status of the SMTP server connection.
Displays the acceptable e-mail addresses for the E-Mail Alert feature specified in E-mail List 1.
Displays the status, and whether to receive an E-Mail Alert, for consumables.
Displays the status, and whether to receive an E-Mail Alert, for paper
handling.
Displays the status, and whether to receive an E-Mail Alert, for Service Calls.
Displays the acceptable e-mail addresses for the E-Mail Alert feature specified in E-mail List 2.
Displays the status, and whether to receive an E-Mail Alert, for consumables.
Displays the status, and whether to receive an E-Mail Alert, for paper
handling.
Displays the status, and whether to receive an E-Mail Alert, for Service Calls.
Downloaded from ManualsPrinter.com Manuals
Comments to this Manuals