Dell 2130 Color Laser Troubleshooting Guide Page 86

  • Download
  • Add to my manuals
  • Print
  • Page
    / 204
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 85
Abnormal Noise
2a
Check the crease. Is the crease within 30 mm of the four edges of the
envelope?
This type of crease is considered
normal. Your printer is not at fault.
or COM10), go to action 3a.
If the envelope is shorter than 220 mm
(Monarch or DL), go to action 3b.
2b
Execute the Paper Wrinkle Check Mode.
1. Launch the Tool Box, and click Paper Wrinkle Check Mode on
the Diagnosis tab.
2. Click the Start button.
Is the paper wrinkled?
Contact Dell.
Go to action 3c.
3a
Does the envelope have a flap on the long edge?
The envelope is C5. Go to action 4a.
The envelope is COM-10. Go to 4b.
3b
Load the envelope long edge feed in the standard 250-sheet tray with
the flap open.
Is the problem recovered?
The task is complete.
Go to action 4b.
3c
Replace the fuser if you have a spare. See the fuser replacement guide,
Replacing the Fuser.
Is the problem recovered?
The task is complete.
Contact Dell.
4a
Load the envelope in the standard 250-sheet tray with the flap open
and face down.
Is the problem recovered?
The task is complete.
Go to 4b.
4b
Use a different size envelope.
Is the problem recovered?
The task is complete.
Contact Dell.
Action
Yes
No
1
Locate the cause of the problem by removing the toner cartridges, fuser, and PHD unit.
1. Remove the toner cartridges, fuser, and PHD unit. See "Removing the Used Toner Cartridge", "Replacing the Print Head
Device (PHD) Unit" and the fuser replacement guide, Replacing the Fuser.
2. Launch the Tool Box, and click Machine Check on the Diagnosis tab.
3. Select Main Motor Operation Check from the drop-down list box, and click the Start button.
4. Click the Play of Sound button to check the motor sound.
Does the noise generated from the printer match with the noise from the Play of Sound button?
Contact
Dell.
Go to
action 2.
2
1. On the Machine Check page, select Fuser Motor Operation Check from the drop-down list box, and click the Start
button.
2. Click the Play of Sound button to check the motor sound.
Does the noise generated from the printer match with the noise from the Play of Sound button?
Contact
Dell.
Go to
action 3.
3
1. On the Machine Check page, select Dispense Motor Check (Yellow), Dispense Motor Check (Magenta), Dispense
Motor Check (Cyan), or Dispense Motor Check (Black) from the drop-down list box, and click the Start button.
2. Click the Play of Sound button to check the motor sound.
3. Repeat steps 1 and 2 to perform Dispense Motor Check for the rest of the toner cartridges.
NOTE: You can perform Dispense Motor Check for CMYK in any order you desire.
NOTE: Do not check the operation of the dispense motor repeatedly.
Does the noise generated from the printer match with the noise from the Play of Sound button?
Contact
Dell.
Go to
action 4.
4
1. Reinstall the fuser.
2. Perform action 3 again.
Does the noise generated from the printer match with the noise from the Play of Sound button?
Contact
Dell.
Go to
action 5.
5
1. Reinstall the PHD unit.
2. Perform action 3 again.
Does the noise generated from the printer match with the noise from the Play of Sound button?
Contact
Dell.
Go to
action 6.
6
1. Reinstall the toner cartridges.
2. Perform action 3 again.
Does the noise generated from the printer match with the noise from the Play of Sound button?
Contact
Dell.
Contact
Dell.
Downloaded from ManualsPrinter.com Manuals
Page view 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 203 204

Comments to this Manuals

No comments