TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
Displays the MAC address of the printer's wireless network adapter.
Displays the channel number of the printer's wireless connection.
Displays the quality of the printer's wireless network connection.
Select the security method from the list.
Select the WEP key code from either Hex or Ascii.
Specifies the WEP key set used through the wireless network only when WEP 128bits or WEP 64bits is selected
for Encryption.
Enter the WEP key again to confirm it.
Specifies the transmit key from the list.
Specifies the pass phrase from 8 to 63 alphanumeric characters only when WPA2-PSK AES or WPA-PSK AES,
WPA-PSK TKIP is selected for Encryption.
Enter the pass phrase again to confirm it.
NOTE: An optional wireless printer adapter is required to display the Wireless LAN page.
Selects the IP address mode.
Sets the gateway address.
Select the check box to set the IP address manually.
Sets the IP address. To specify an IPv6 address, enter the address and then "64"
after a slash (/). For details, consult your system administrator.
Sets the gateway address.
Specifies the domain name of the domain name server. Up to 255 alphanumeric characters, periods, and hyphens
can be used. If you need to specify more than one domain name, separate them using a comma or semicolon.
Get DNS Server Address
from DHCP
Select the check box to get the DNS server address automatically from the DHCP
server.
Manual DNS Server
Address
Sets the DNS server address.
Get DNS Server Address
from DHCPv6-lite
Select the check box to get the DNS server address automatically from the DHCPv6-
lite server.
Manual DNS Server
Address
Sets the DNS server address.
Priority to IPv6 DNS
Name Resolution
Select the check box to enable the DNS Name Resolution feature.
Sets the connection timeout period from 1 to 1000 seconds.
To set the IP Filter settings, click IP Filter (IPv4). The IP Filter (IPv4) page is displayed.
Sets the port number from 9000 to 9999.
Sets the connection timeout period between 1 and 1000 seconds.
To set the IP Filter settings, click IP Filter (IPv4). The IP Filter (IPv4) page is displayed.
Sets the port number to 80 or from 8000 to 9999.
Sets the receive timeout period from 1 to 65535 seconds.
Sets the notification timeout period from 1 to 60 seconds.
Sets the maximum number of TTL from 1 to 10.
Maximum Number of
Notification
Sets the maximum number of notifications from 10 to 20.
Sets the port number to 80 or from 8000 to 9999.
Displays the maximum number of connections received simultaneously by the client.
Sets the connection timeout period from 1 to 255 seconds.
Sets the address in the address field. Enter a numeric value between 0 and 255 in each field of
"aaa.bbb.ccc.ddd." However, 127 and 224 to 254 cannot be used to "aaa."
Sets the Subnet Mask in the Mask field. Enter a numeric value between 0 and 255 in each field.
Rejects printing from specified network address.
Downloaded from ManualsPrinter.com Manuals
Comments to this Manuals