Dell 2130 Color Laser Troubleshooting Guide Page 66
- Page / 204
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
094-911
Contact Support
094-911
IfMessageReturns
The DTB unit reaches the end of its life.
Turn the printer off and then on.
If this does not solve the problem, contact Dell.
See "Contacting Dell".
CRUM ID
093-NNN
Reseat XXX Cartridge
An unsupported unit is installed.
XXX indicates a unit that you replace.
Remove the unsupported unit and install a supported one.
See "Maintaining Your Printer".
PHD
091-912
Reseat PHD
The eight yellow ribbons are not correctly
removed from the PHD unit.
Ensure that the eight yellow ribbons are correctly removed from the
PHD unit.
If this does not solve the problem, replace the PHD unit.
See "Replacing the Print Head Device (PHD) Unit".
Shake Cartridge
093-NNN
Remove and Shake
XXX Cartridge
The density of the print cartridge is not
enough.
XXX is one of the following:
Black
Cyan
Yellow
Magenta
Shake the specified toner cartridge five or six times to distribute the
toner evenly and reinsert it.
CTD Sensor Dirty
092-310
Clean CTD Sensor
The CTD sensor is dirty.
Clean the CTD sensor.
See "Cleaning the CTD Sensor Inside the Printer".
Close XXX Cover
077-NNN
XXX Cover
Is Open
Printer cover is open.
XXX indicates printer cover.
Close the specified cover.
Check Paper Size
024-NNN
Load XXX
xxx
Load XXX
yyy
Incorrect paper size is loaded in the
specified tray.
XXX indicates the number of the tray or
single sheet feeder.
xxx indicates a paper size.
yyy indicates paper quality.
Load the specified paper in the specified trays.
See "Loading Print Media in the Standard 250-Sheet Tray and
Optional 250-Sheet Feeder" and "Loading the Single Sheet Feeder".
Out of Memory
016-700
Job too Large
Press
The printer memory is full and cannot
continue processing the current print job.
Press (Set) button to clear the message, cancel the current print
job, and conduct the next print job, if any.
Press Cancel button to cancel the print job.
Press Menu button to open Stored Print and delete the holding job.
To avoid this error in the future, do the following:
Delete unnecessary fonts, macros, and other data in printer memory.
Install additional printer memory.
See "Printing Held and Proof Print Jobs".
Disk Full
016-980
Job too Large
Press
RAM disk memory is full and cannot continue
processing the current print job.
Press (Set) button to clear the message, cancel the current print
job, and conduct the next print job, if any.
Press Cancel button to cancel the print job.
Press Menu button to open Stored Print and delete the current job.
To avoid this error in the future, do the following:
Reduce the number of print pages such as splitting the print data.
Increase free memory space by deleting unnecessary data in the RAM
disk.
See "Printing Held and Proof Print Jobs".
Downloaded from ManualsPrinter.com Manuals
- Print Media Guidelines 2
- Recommended Paper 3
- Unacceptable Paper 3
- Selecting Paper 3
- Envelopes 4
- Labels 5
- Supported Paper Types 6
- Paper Type Specifications 6
- Loading Print Media 8
- Loading Letterhead 10
- Loading Envelopes 10
- Single Sheet Feeder 11
- Loading an Envelope 12
- Using the Duplex Function 13
- Using the Output Tray 13
- Printer Settings 15
- Resetting Defaults 17
- Printer Settings Report 19
- Reports 20
- TCP/IP Settings 20
- Printer Maintenance 21
- Paper Density 22
- Registration Adjustment 22
- Non-Dell Toner 23
- Initialize PrintMeter 24
- Diagnosis 25
- Chart Print 26
- Machine Check 26
- Paper Wrinkle Check Mode 26
- Environment Sensor Info 27
- Developer Stir Mode 27
- Refresh Mode 27
- Report/List 28
- Admin Menu 29
- Protocol 30
- IP Filter 30
- System Settings 31
- Audio Tones 32
- Fault Time-Out 32
- Time-Out 32
- Panel Language 32
- Print ID 33
- Print Text 33
- Banner Sheet 33
- Auto Log Print 33
- RAM Disk 34
- Odd Page 2Sided 34
- Substitute Tray 34
- Maintenance 35
- Adjust Fuser 36
- Auto Reg Adj 36
- Color Reg Adj 36
- Clear Storage 38
- Paper Tray 38
- Paper Size 38
- Orientation 38
- 2 Sided 39
- Symbol Set 40
- Font Size 40
- Font Pitch 40
- Form Line 40
- Quantity 41
- Image Enhance 41
- Hex Dump 41
- Draft Mode 41
- LineTermination 41
- Tray Settings 42
- Tray 1 43
- Tray 2 43
- Stored Print 44
- Setting Panel Lock 44
- Disabling Panel Lock 45
- Printer Status Window 46
- Status Monitor Console 46
- Software Update 46
- Printer Settings Utility 47
- Printing 48
- Printing a Report Page 49
- Printing a Font Sample List 50
- Stored Print 51
- Proof Print 51
- Secure Print 51
- Windows 2000 53
- Point and Print 54
- Peer-to-Peer 55
- Understanding Fonts 59
- Resident Fonts 60
- Symbol Sets 62
- Wingdings 63
- ITC ZapfDingbats MS 63
- Clearing Jams 68
- Troubleshooting Guide 76
- Print Quality Problems 77
- Random spots/blurred images 79
- The entire output is blank 80
- Pitched color dots 81
- Vertical blanks 82
- Ghosting 82
- Light fatigue 83
- Bead-Carry-Out (BCO) 83
- Jagged characters 84
- Banding 84
- Auger mark 85
- Creased/stained paper 85
- Abnormal Noise 86
- Jam/Alignment Problems 87
- Regi jam 88
- Exit Jam 88
- Option Problem 89
- Other Problems 89
- Contacting Service 89
- Personal Printer Setup 91
- Network Printer Setup 91
- Before Installation 93
- Start Remote Registry 94
- Disable Simple File Sharing 95
- Setup Security 96
- Resetting Defaults 97
- Printer Setup 99
- Maintaining Your Printer 100
- Storing Print Media 101
- Storing Consumables 101
- Replacing Toner Cartridges 101
- Installing the PHD Unit 104
- Replacing Retard Roller 106
- Determining Values 112
- Fast Scan 113
- Slow Scan 113
- Entering Values 114
- When Using the Tool Box 115
- Removing Options 116
- Removing a Duplexer 117
- Removing a Memory 118
- Printer Specifications 122
- Environment 123
- Cables 123
- Back to Contents Page 124
- Appendix 125
- Contacting Dell 126
- Front View 127
- Rear View 127
- Operator Panel 129
- Finding Information 131
- About Your Printer 133
- Connecting Your Printer 137
- Turn On the Printer 138
- Assign an IP Address 140
- Using the Reset Button 141
- For Internet Explorer 145
- 6.0, Internet Explorer 7.0 145
- For Firefox 2.0 or Later 146
- Page Display Format 147
- Details of the Menu Items 148
- Printer Status 149
- Printer Jobs 150
- Printer Settings 150
- USB Settings 153
- PCL Settings 153
- Printer Maintenance 154
- Auto Registration Adjustment 155
- Clean Developer 155
- Adjust Altitude 155
- Reset Defaults 155
- Print Server Settings 156
- NetWare Setup Page 158
- E-Mail Alert Setup Page 158
- NetWare 161
- E-Mail Alert 162
- SNMP v1/v2c 163
- SNMP v3 163
- Other Features 164
- Copy Printer Settings 165
- Print Volume 166
- Tray Settings 167
- Installing a Duplexer 170
- Installing a Memory 173
- For Windows Vista/Vista x64 175
- For Windows 2000 176
- Contents of Box 179
- For DHCP network: 184
- For Fixed IP network: 186
Related products and manuals for Laser/LED printers Dell 2130 Color Laser
Laser/LED printers Dell B1165nfw User's Guide
(303 pages)
(303 pages)
Laser/LED printers Dell 1110 User's Guide
(76 pages)
(76 pages)
Laser/LED printers Dell 2355dn User's Guide
(320 pages)
(320 pages)
© 2020, manymanuals.com. All rights reserved. | 0.853 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals