a.
Press until >Reports appears, and then press .b.
System Settings is displayed. Press .c.
The system settings page is printed.
Verify Duplexer is listed in the system settings under Printer Options .d.
If the duplexer is not listed, turn off the multifunction printer, unplug the power cable, and
reinstall the optional duplexer.
If you installed the optional duplexer after installing the printer driver, update your driver by following
the instructions for each operating system. If the multifunction printer is on a network, update the
driver for each client.
11.
When Using PCL Driver
Microsoft
®
Windows Vista
®
Click Start Control Panel Hardware and Sound Printers .1.
Right-click the multifunction printer and select Properties .2.
Click the Options tab, and then select Get Information from Printer .3.
Click Apply , and then click OK .4.
Close the Printers dialog box.5.
Windows
®
XP, Windows XP 64-bit Edition, Windows Server
®
2003,
Windows Server 2003 Enterprise x64 Edition
Click Start Printers and Faxes .1.
Right-click the multifunction printer and select Properties .2.
Click the Options tab, and then select Get Information from Printer .3.
Click Apply , and then click OK .4.
Close the Printers and Faxes dialog box.5.
Windows Server
®
2008, Windows Server 2008 Enterprise x64 Edition
Click Start Control Panel Printers .1.
Right-click the multifunction printer and select Properties .2.
3.
4.
Comments to this Manuals