Displays whether active discovery is enabled.
NOTE: An optional multi-protocol card is required to display the NetWare Setup page.
E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP (Simple Mail Transfer Protocol/Post Office Protocol) used for the
e-mail feature and E-Mail Alerts feature. In this page, you can only verify the settings of items. If you want
to change the settings, go to the pages in the Print Server Settings tab.
Values:
Displays the port status.
Displays the primary SMTP (Simple Mail Transfer
Protocol) gateway.
Displays the SMTP port number.
E-Mail Send Authentication
Displays the authentication method for outgoing e-
mail.
Displays the POP3 (Post Office Protocol 3) server
address.
Displays the POP3 port number.
Displays the IP address of servers connected with
SMTP protocol when data is incoming.
Displays the status of the SMTP server connection.
Displays the acceptable e-mail addresses for the E-
Mail Alert feature specified in E-mail List 1.
Displays the status, and whether to receive an E-Mail
Alert for consumables.
Displays the status, and whether to receive an E-Mail
Alert for paper handling.
Displays the status, and whether to receive an E-Mail
Alert for Service Calls.
Displays the acceptable e-mail addresses for the E-
Mail Alert feature specified in E-mail List 2.
Displays the status, and whether to receive an E-Mail
Alert for consumables.
Displays the status, and whether to receive an E-Mail
Alert for paper handling.
Comments to this Manuals