Detects Ethernet transmission rate and the duplex settings
automatically.
Selects 10Base-T Half-Duplex as the default value.
Selects 10Base-T Full-Duplex as the default value.
Selects 100Base-T Half-Duplex as the default value.
Selects 100Base-T Full-Duplex as the default value.
Current Ethernet Settings
Displays the current settings of Ethernet.
Displays the printer's MAC address.
Select the check box to enable the LPD.
Select the check box to enable the Port9100.
Select the check box to enable the IPP port.
Select the check box to enable the WSD port.
Select the check box to enable the FTP port.
Select the check box to enable the SMB.
You can also configure the transport protocol to be used.
TCP/IP and NetBEUI can be selected simultaneously as the
transport protocol.
Select the check box to enable the NetWare port. You can also
configure the transport protocol to be used. IPX/SPX and
TCP/IP can be selected simultaneously as the transport
protocol.
Select the check box to enable the AppleTalk port.
Select the check box to enable the Bonjour(mDNS) feature.
Select the check box to enable the E-Mail Alert feature.
Select the check box to enable the SNMP (Simple Network
Management Protocol).
You can also configure the transport protocol to be used. UDP
and IPX can be selected simultaneously as the transport
protocol.
IPX is only available when the multi-protocol card is installed.
*
1
The Ethernet settings are not displayed when the optional wireless printer adapter is installed.
*
2
An optional multi-protocol card is required to display the item.
Comments to this Manuals